Making Bag Filters will need these machines:
- Bag Filter Frame Forming Machine
- Bag Filter U Forming Machine
- Inner Frame Clinching Machine
- Pressing Machine
- Frame Forming Machine
- Outer Frame Riveting Machine
- Ultrasonic Machine
- Pocket Filter Cutting Machine
Bag filters have good dust-holding functions and can be divided into primary-efficiency bag filters and medium-efficiency bag filters according to their filtration levels; according to filter materials, they can be divided into: chemical fiber bag air filters and synthetic fiber bag air filters. Filters, fiberglass bag filters, activated carbon composite bag air filters, etc.
The bag-type medium-efficiency air filter is made of ultra-fine synthetic fibers with a special weaving method to avoid the discomfort that old glass fiber materials may cause to the human body. The filter material contains electrostatic fibers, which can filter sub-micron (less than 1 or less than 1) dust. The efficiency is particularly good, with a filtration efficiency of 85% for particles of 1 micron. It has high dust capture power, high dust load, high air permeability, and long service life.
Features: The filter material is made of extremely fine glass fiber;
Usage: Widely used in pharmaceutical, electronics, food industries and general air conditioning systems.
Performance: good sealing, strong circulation capacity, small pressure loss, easy installation and operation, and strong dust holding function.
Application areas:
It is widely used in intermediate filtration of air-conditioning systems and is suitable for occasions with high dust concentration. It uses high-quality chemical fiber non-woven filter material and has a large dust holding capacity. Mainly used to filter dust particles of 1-5 microns, such as: clean rooms in various industries, livestock farms, hospitals, commercial buildings, and residences. It is also suitable for exhaust or return air systems, and can also be used for platform ventilation systems on ocean-going ships and seaports.
Bag Filter Frame Forming Machine is suitable for the processing of outer frame bag air filter.
Bag Filter Frame Forming Machine is composed of automatic feeding device, multiple sets of rolling dies, cutter mechanism and receiving mechanism. Place the forming iron sheet on the feeding device, and place the forming material on the material rack through the disc in the feeding device; then pass the forming material through the automatic tensioning mechanism of the feeding device, and sequentially pass the material strip through each component. According to the required size, you can set the parameters through the touch screen, and the processing is simple and clear. Bag Filter Frame Forming Machine is the first choice for forming the outer frame of the air cloth filter bag.
Bag Filter Frame Forming Machine is powered by electricity and compressed air.
Adjustment of the deviation of the strip: the uneven pressure of the left and right adjustment screws is the main reason for the deviation of the strip; the adjustment method is to repeatedly adjust the slider to tighten the screw. If the strip is deviated to the left, generally slide the left side. Adjust the block screw down slightly. To run off to the right, generally adjust the right screw up and down slightly, so as to balance the force between the upper and lower pressing and rolling.
Regular maintenance
Regular maintenance means that in addition to daily maintenance, Bag Filter Frame Forming Machine is stopped according to the specified cycle and checked in a planned way. Regular maintenance is usually carried out once a month to check the operation of each component, the wear of moving parts, and whether the fasteners are loose.
1. Check
1.1 Check whether the sprocket is well engaged and whether there is looseness and jumping;
1.2 Whether the transmission chain is in good condition;
1.3 Whether the transmission mechanism works well and whether there is any abnormal sound;
1.4 Whether the adjusting screw is loose or falling off, especially the rolling die should be checked carefully.
2. Refuel regularly
2.1 At the transmission chain brush with a brush and lubricating oil once per shift;
2.2 Add lubricating oil every shift at the movable joints of the structure;
2.3 Lubricating oil shall be added on time according to production conditions at the lubricating and refueling places specified in 2.3.
2.4 Regularly check the oil level of the lubricating oil of the worm gear reducer. If the oil level is low, it should be added in time.